SimpleBoosterVaccine

The SimpleBoosterVaccine intervention class is derived from SimpleVaccine and preserves many of the same parameters. The behavior is much like SimpleVaccine, except that upon distribution and successful take, the vaccine’s effect is determined by the recipient’s immune state. If the recipient’s immunity modifier in the corresponding channel (acquisition, transmission, or mortality) is above a user-specified threshold, then the vaccine’s initial effect will be equal to the corresponding priming parameter. If the recipient’s immune modifier is below this threshold, then the vaccine’s initial effect will be equal to the corresponding boosting parameter. After distribution, the effect wanes, just like SimpleVaccine. In essence, this intervention provides a SimpleVaccine intervention with one effect to all naive (below- threshold) individuals, and another effect to all primed (above-threshold) individuals; this behavior is intended to mimic biological priming and boosting.

Note

Parameters are case-sensitive. For Boolean parameters, set to 1 for true or 0 for false. Minimum, maximum, or default values of “NA” indicate that those values are not applicable for that parameter.

EMOD does not use true defaults; that is, if the dependency relationships indicate that a parameter is required, you must supply a value for it. However, many of the tools used to work with EMOD will use the default values provided below.

JSON does not permit comments, but you can add “dummy” parameters to add contextual information to your files.

The table below describes all possible parameters with which this class can be configured. The JSON example that follows shows one potential configuration.

Parameter

Data type

Minimum

Maximum

Default

Description

Example

Boost_Effect

float

0

1

1

Specifies the boosting effect on [acquisition/transmission/mortality] immunity for previously exposed individuals (either natural or vaccine-derived). This does not replace current immunity, it builds multiplicatively on top of it.

{
    "Intervention_Config": {
        "Cost_To_Consumer": 10.0,
        "Vaccine_Take": 1,
        "Vaccine_Type": "MortalityBlocking",
        "Prime_Effect": 0.25,
        "Boost_Effect": 0.45,
        "Boost_Threshold": 0.0,
        "Waning_Config": {
            "Box_Duration": 10,
            "Initial_Effect": 1,
            "class": "WaningEffectBox"
        },
        "class": "SimpleBoosterVaccine"
    }
}

Boost_Threshold

float

0

1

0

Specifies how much immunity is required before the vaccine changes from a priming effect to a boosting effect.

{
    "Intervention_Config": {
        "Cost_To_Consumer": 10.0,
        "Vaccine_Take": 1,
        "Vaccine_Type": "MortalityBlocking",
        "Prime_Effect": 0.25,
        "Boost_Effect": 0.45,
        "Boost_Threshold": 0.0,
        "Waning_Config": {
            "Box_Duration": 10,
            "Initial_Effect": 1,
            "class": "WaningEffectBox"
        },
        "class": "SimpleBoosterVaccine"
    }
}

Cost_To_Consumer

float

0

999999

10

The unit cost per vaccine (unamortized).

{
    "Cost_To_Consumer": 10.0
}

Disqualifying_Properties

array of strings

NA

NA

[]

A list of IndividualProperty key:value pairs that cause an intervention to be aborted (persistent interventions will stop being distributed to individuals with these values). See NodeProperties and IndividualProperties parameters for more information. Generally used to control the flow of health care access. For example, to prevent the same individual from accessing health care via two different routes at the same time.

{
    "Disqualifying_Properties": [
        "InterventionStatus:LostForever"
    ]
}

Dont_Allow_Duplicates

boolean

0

1

0

If an individual’s container has an intervention, set to true (1) to prevent them from receiving another copy of the intervention. Supported by all intervention classes.

{
    "Dont_Allow_Duplicates": 0
}

Efficacy_Is_Multiplicative

boolean

0

1

1

The overall vaccine efficacy when individuals receive more than one vaccine. When set to true (1), the vaccine efficacies are multiplied together; when set to false (0), the efficacies are additive.

{
    "Intervention_Config": {
        "class": "SimpleVaccine",
        "Cost_To_Consumer": 10,
        "Vaccine_Type": "AcquisitionBlocking",
        "Vaccine_Take": 1,
        "Efficacy_Is_Multiplicative": 0,
        "Waning_Config": {
            "class": "WaningEffectConstant",
            "Initial_Effect": 0.3
        }
    }
}

Intervention_Name

string

NA

NA

NA

The optional name used to refer to this intervention as a means to differentiate it from others that use the same class.

{
    "Intervention_Config": {
        "class": "SimpleBoosterVaccine",
        "Intervention_Name": "Tetanus booster shot"
    }
}

New_Property_Value

string

NA

NA

NA

An optional IndividualProperty key:value pair that will be assigned when the intervention is distributed. See NodeProperties and IndividualProperties parameters for more information. Generally used to indicate the broad category of health care cascade to which an intervention belongs to prevent individuals from accessing care through multiple pathways. For example, if an individual must already be taking a particular medication to be prescribed a new one.

{
    "New_Property_Value": "InterventionStatus:None"
}

Prime_Effect

float

0

1

1

Specifies the priming effect on [acquisition/transmission/mortality] immunity for naive individuals (without natural or vaccine-derived immunity).

{
    "Intervention_Config": {
        "Cost_To_Consumer": 10.0,
        "Vaccine_Take": 1,
        "Vaccine_Type": "MortalityBlocking",
        "Prime_Effect": 0.25,
        "Boost_Effect": 0.45,
        "Boost_Threshold": 0.0,
        "Waning_Config": {
            "Box_Duration": 10,
            "Initial_Effect": 1,
            "class": "WaningEffectBox"
        },
        "class": "SimpleBoosterVaccine"
    }
}

Vaccine_Take

float

0

1

1

The rate at which delivered vaccines will successfully stimulate an immune response and achieve the desired efficacy. For example, if it is set to 0.9, there will be a 90 percent chance that the vaccine will start with the specified efficacy, and a 10 percent chance that it will have no efficacy at all.

{
    "Intervention_Config": {
        "class": "SimpleVaccine",
        "Cost_To_Consumer": 10,
        "Vaccine_Type": "AcquisitionBlocking",
        "Vaccine_Take": 1,
        "Efficacy_Is_Multiplicative": 0,
        "Waning_Config": {
            "class": "WaningEffectConstant",
            "Initial_Effect": 0.3
        }
    }
}

Vaccine_Type

enum

NA

NA

Generic

The type of vaccine to distribute in a vaccine intervention. Possible values are:

Generic

The vaccine can reduce transmission, acquisition, and mortality.

TransmissionBlocking

The vaccine will reduce pathogen transmission.

AcquisitionBlocking

The vaccine will reduce the acquisition of the pathogen by reducing the force of infection experienced by the vaccinated individual.

MortalityBlocking

The vaccine reduces the disease-mortality rate of a vaccinated individual.

{
    "Intervention_Config": {
        "class": "SimpleVaccine",
        "Cost_To_Consumer": 10,
        "Vaccine_Type": "AcquisitionBlocking",
        "Vaccine_Take": 1,
        "Efficacy_Is_Multiplicative": 0,
        "Waning_Config": {
            "class": "WaningEffectConstant",
            "Initial_Effect": 0.3
        }
    }
}

Waning_Config

JSON object

NA

NA

NA

The configuration of how the intervention efficacy wanes over time. Specify how this effect decays over time using one of the Waning effect classes.

{
    "Waning_Config": {
        "Box_Duration": 3650,
        "Initial_Effect": 1,
        "class": "WaningEffectBox"
    }
}
{
    "Use_Defaults": 1,
    "Campaign_Name": "Generic Seattle Regression Campaign",
    "Events": [{
        "class": "CampaignEvent",
        "Nodeset_Config": {
            "class": "NodeSetAll"
        },
        "Start_Day": 20,
        "Event_Coordinator_Config": {
            "class": "StandardInterventionDistributionEventCoordinator",
            "Target_Demographic": "Everyone",
            "Demographic_Coverage": 1.0,
            "Intervention_Config": {
                "class": "SimpleBoosterVaccine",
                "Cost_To_Consumer": 10.0,
                "Vaccine_Take": 1,
                "Vaccine_Type": "MortalityBlocking",
                "Prime_Effect": 0.25,
                "Boost_Effect": 0.45,
                "Boost_Threshold": 0.0,
                "Waning_Config": {
                    "Box_Duration": 10,
                    "Initial_Effect": 1,
                    "class": "WaningEffectBox"
                }
            }
        }
    }]
}