IncidenceEventCoordinator¶
The IncidenceEventCoordinator coordinator class distributes interventions based on the number of events counted over a period of time.
Note
Parameters are case-sensitive. For Boolean parameters, set to 1 for true or 0 for false. Minimum, maximum, or default values of “NA” indicate that those values are not applicable for that parameter.
EMOD does not use true defaults; that is, if the dependency relationships indicate that a parameter is required, you must supply a value for it. However, many of the tools used to work with EMOD will use the default values provided below.
JSON format does not permit comments, but you can add “dummy” parameters to add contextual information to your files. Any keys that are not EMOD parameter names will be ignored by the model.
The table below describes all possible parameters with which this class can be configured. The JSON example that follows shows one potential configuration.
Parameter |
Data type |
Minimum |
Maximum |
Default |
Description |
Example |
|---|---|---|---|---|---|---|
Action_List |
array of JSON objects |
NA |
NA |
NA |
List (array) of JSON objects, including the values specified in the following parameters: Threshold, Event_Type, Event_To_Broadcast. |
{
"Action_List": [
{
"Event_To_Broadcast": "Action_Event_1",
"Event_Type": "COORDINATOR",
"Threshold": 20
},
{
"Event_To_Broadcast": "Action_Event_2",
"Event_Type": "COORDINATOR",
"Threshold": 30
}
],
"Threshold_Type": "COUNT"
}
|
Count_Events_For_Num_Timesteps |
integer |
1 |
2.15E+00 |
1 |
If set to true (1), then the waning effect values, as specified in the Effect_List list of objects for the WaningEffectCombo classes, are added together. If set to false (0), the waning effect values are multiplied. The resulting waning effect value cannot be greater than 1. |
{
"Incidence_Counter": {
"Count_Events_For_Num_Timesteps": 5,
"Trigger_Condition_List": [
"PropertyChange"
],
"Node_Property_Restrictions": [
{
"Risk": "HIGH"
}
],
"Target_Demographic": "Everyone",
"Demographic_Coverage": 0.6,
"Property_Restrictions_Within_Node": [
{
"Accessibility": "YES"
}
]
}
}
|
Event_To_Broadcast |
string |
NA |
NA |
NA |
The action event to occur when the specified trigger value in the Threshold parameter is met. At least one action must be defined for Event_To_Broadcast. The events contained in the list can be built-in events (see Event list for possible events). |
{
"Threshold_Type": "COUNT",
"Action_List": [
{
"Threshold": 20,
"Event_To_Broadcast": "Action_Event_1"
},
{
"Threshold": 30,
"Event_To_Broadcast": "Action_Event_2"
}
]
}
|
Event_Type |
enum |
NA |
NA |
INDIVIDUAL |
The type of event to be broadcast. Possible values are:
|
{
"Action_List": [
{
"Event_To_Broadcast": "Action_Event_1",
"Event_Type": "COORDINATOR",
"Threshold": 20
},
{
"Event_To_Broadcast": "Action_Event_2",
"Event_Type": "COORDINATOR",
"Threshold": 30
}
],
"Threshold_Type": "COUNT"
}
|
Incidence_Counter |
array of JSON objects |
NA |
NA |
NA |
List of JSON objects for specifying the conditions and parameters that must be met for an incidence to be counted. Some of the values are specified in the following parameters: Count_Events_For_Num_Timesteps, Trigger_Condition_List, Node_Property_Restrictions. |
{
"Incidence_Counter": {
"Count_Events_For_Num_Timesteps": 5,
"Trigger_Condition_List": [
"PropertyChange"
],
"Node_Property_Restrictions": [
{
"Risk": "HIGH"
}
],
"Target_Demographic": "Everyone",
"Demographic_Coverage": 0.6,
"Property_Restrictions_Within_Node": [
{
"Accessibility": "YES"
}
]
}
}
|
Node_Property_Restrictions |
array of JSON objects |
NA |
NA |
NA |
A list of the NodeProperty key:value pairs, as defined in the demographics file, that nodes must have to be targeted by the intervention. See NodeProperties and IndividualProperties parameters for more information. You can specify AND and OR combinations of key:value pairs with this parameter. |
The following example restricts the intervention to nodes that are urban and medium risk or rural and low risk. {
"Node_Property_Restrictions": [
{
"Place": "URBAN",
"Risk": "MED"
},
{
"Place": "RURAL",
"Risk": "LOW"
}
]
}
|
Number_Repetitions |
integer |
-1 |
1000 |
1 |
The number of times an intervention is given, used with Timesteps_Between_Repetitions. |
{
"class": "IncidenceEventCoordinator",
"Number_Repetitions": 3
}
|
Responder |
array of JSON objects |
NA |
NA |
NA |
List of JSON objects for specifying the threshold type, values, and the actions to take when the specified conditions and parameters have been met, as configured in the Incidence_Counter parameter. Some of the values are specified in the following parameters:
|
{
"Responder": {
"Threshold_Type": "COUNT",
"Action_List": [
{
"Threshold": 5,
"Event_To_Broadcast": "Action_Event_1"
},
{
"Threshold": 10,
"Event_To_Broadcast": "Action_Event_2"
}
]
}
}
|
Threshold |
float |
0 |
3.40E+03 |
0 |
The threshold value that triggers the specified action for the Event_To_Broadcast parameter. When you use the Threshold parameter you must also use the Event_To_Broadcast parameter. |
{
"Threshold_Type": "COUNT",
"Action_List": [
{
"Threshold": 20,
"Event_To_Broadcast": "Action_Event_1"
},
{
"Threshold": 30,
"Event_To_Broadcast": "Action_Event_2"
}
]
}
|
Threshold_Type |
enum |
NA |
NA |
COUNT |
Threshold type. Possible values are:
|
{
"Threshold_Type": "COUNT",
"Action_List": [
{
"Threshold": 20,
"Event_To_Broadcast": "Action_Event_1"
},
{
"Threshold": 30,
"Event_To_Broadcast": "Action_Event_2"
}
]
}
|
Timesteps_Between_Repetitions |
integer |
-1 |
1000 |
-1 |
The repetition interval. |
{
"class": "IncidenceEventCoordinator",
"Number_Repetitions": 3,
"Timesteps_Between_Repetitions": 6
}
|
Trigger_Condition_List |
array of strings |
NA |
NA |
NA |
A list of events that will trigger an intervention. |
{
"Trigger_Condition_List": [
"NewClinicalCase",
"NewSevereCase"
]
}
|
{
"class": "IncidenceEventCoordinator",
"Number_Repetitions" : 3,
"Timesteps_Between_Repetitions" : 6
}