Enable or disable features

The following parameters enable or disable features of the model, such as allowing births, deaths, or aging. Set to false (0) to disable; set to true (1) to enable.

Note

Parameters are case-sensitive. For Boolean parameters, set to 1 for true or 0 for false. Minimum, maximum, or default values of “NA” indicate that those values are not applicable for that parameter.

EMOD does not use true defaults; that is, if the dependency relationships indicate that a parameter is required, you must supply a value for it. However, many of the tools used to work with EMOD will use the default values provided below.

JSON format does not permit comments, but you can add “dummy” parameters to add contextual information to your files. Any keys that are not EMOD parameter names will be ignored by the model.

Parameter

Data type

Minimum

Maximum

Default

Description

Example

Enable_Aging

boolean

0

1

1

Controls whether or not individuals in a population age during the simulation. Enable_Vital_Dynamics must be set to true (1).

 
{
    "Enable_Vital_Dynamics": 1,
    "Enable_Aging": 1
}

Enable_Air_Migration

boolean

0

1

0

Controls whether or not migration by air travel will occur. Migration_Model must be set to FIXED_RATE_MIGRATION.

 
{
    "Migration_Model": "FIXED_RATE_MIGRATION",
    "Enable_Air_Migration": 1,
    "Air_Migration_Filename": "../inputs/air_migration.bin"
}

Enable_Birth

boolean

0

1

1

Controls whether or not individuals will be added to the simulation by birth. Enable_Vital_Dynamics must be set to true (1). If you want new individuals to have the same intervention coverage as existing individuals, you must add a BirthTriggeredIV to the campaign file.

 
{
    "Enable_Vital_Dynamics": 1,
    "Enable_Birth": 1
}

Enable_Coinfection_Incidence

boolean

0

1

None

Controls whether or not coinfection incidence is enabled.

Enable_Coinfection_Mortality

boolean

0

1

None

Controls whether or not TB/HIV coinfection mortality is enabled.

Enable_Default_Reporting

boolean

0

1

1

Controls whether or not the default InsetChart.json report is created.

 
{
    "Enable_Default_Reporting": 1
}

Enable_Demographics_Birth

boolean

0

1

0

Controls whether or not newborns have disease risk drawn from a distribution; uniform disease risk if false. Enable_Birth, Enable_Demographics_Risk, and Enable_Vital_Dynamics must be set to true (1).

 
{
    "Enable_Birth": 1,
    "Enable_Demographics_Birth": 1,
    "Enable_Vital_Dynamics": 1
}

Enable_Demographics_Builtin

boolean

0

1

0

Controls whether or not built-in demographics for default geography will be used. Note that the built-in demographics feature does not represent a real geographical location and is mostly used for testing. Set to true (1) to define the initial population and number of nodes using Default_Geography_Initial_Node_Population and Default_Geography_Torus_Size. Set to false (0) to use demographics input files defined in Demographics_Filenames.

 
{
    "Enable_Demographics_Builtin": 1,
    "Default_Geography_Initial_Node_Population": 1000,
    "Default_Geography_Torus_Size": 3
}

Enable_Demographics_Reporting

boolean

0

1

1

Controls whether or not demographic summary data and age-binned reports are outputted to file.

 
{
    "Enable_Demographics_Reporting": 1
}

Enable_Demographics_Risk

boolean

0

1

0

Controls whether or not the simulation includes the impact of disease risk in demographics.

 
{
    "Enable_Demographics_Risk": 1
}

Enable_Disease_Mortality

boolean

0

1

1

Controls whether or not individuals are removed from the simulation due to disease deaths.

 
{
    "Enable_Disease_Mortality": 1
}

Enable_Family_Migration

boolean

0

1

0

Controls whether or not all members of a household can migrate together when a MigrateFamily event occurs. All residents must be home before they can leave on the trip. Migration_Model must be set to FIXED_RATE_MIGRATION.

 
{
    "Enable_Migration": "FIXED_RATE_MIGRATION",
    "Enable_Family_Migration": 1,
    "Family_Migration_Filename": "../inputs/family_migration.bin"
}

Enable_Heterogeneous_Intranode_Transmission

boolean

0

1

0

Controls whether or not individuals experience heterogeneous disease transmission within a node. When set to true (1), individual property definitions and the \(\beta\) matrix must be specified in the demographics file (see NodeProperties and IndividualProperties parameters). The \(\beta\) values are multiplied with the \(\beta\) 0 value configured by Base_Infectivity.

This is used only in generic, environmental, and typhoid simulations, but must be set to false (0) for all other simulation types. Heterogeneous transmission for other diseases uses other mechanistic parameters included with the simulation type.

 
{
    "Enable_Heterogeneous_Intranode_Transmission": 1
}

Enable_Immune_Decay

boolean

0

1

1

Controls whether or not immunity decays after an infection clears. Set to true (1) if immunity decays; set to false (0) if recovery from the disease confers complete immunity for life. Enable_Immunity must be set to true (1).

 
{
    "Enable_Immunity": 1,
    "Enable_Immune_Decay": 0
}

Enable_Immunity

boolean

0

1

1

Controls whether or not an individual has protective immunity after an infection clears.

 
{
    "Enable_Immunity": 1
}

Enable_Infectivity_Reservoir

boolean

0

1

0

Controls whether or not an exogeneous reservoir of infectivity will be included in the simulation and allows for the infectivity in a node to be increased additively. When set to 1 (true), the demographics parameter InfectivityReservoirSize is expected in NodeAtttributes for each node.

Warning

Do not set both Enable_Infectivity_Reservoir and Enable_Strain_Tracking to true (1) - as this combination will cause an exception error.

 
{
    "Enable_Infectivity_Reservoir": 1
}

Enable_Initial_Susceptibility_Distribution

boolean

0

1

0

Controls whether or not individuals in the population have immunity at the beginning of the simulation. If set to 0, individuals are not initialized with immunity but may acquire immunity. If set to 1, you must indicate the type of distribution to use for immunity in the configuration parameter Immunity_Initialization_Distribution_Type and the distribution values in the demographics file. Enable_Immunity must be set to 1.

 
{
    "Enable_Immunity": 1,
    "Enable_Initial_Susceptibility_Distribution": 1,
    "Immunity_Initialization_Distribution_Type": "DISTRIBUTION_SIMPLE"
}

Enable_Interventions

boolean

0

1

0

Controls whether or not campaign interventions will be used in the simulation. Set Campaign_Filename to the path of the file that contains the campaign interventions.

 
{
    "Enable_Interventions": 1,
    "Campaign_Filename": "campaign.json"
}

Enable_Local_Migration

boolean

0

1

0

Controls whether or not local migration (the diffusion of people in and out of nearby nodes by foot travel) occurs. Migration_Model must be set to FIXED_RATE_MIGRATION.

 
{
    "Migration_Model": "FIXED_RATE_MIGRATION",
    "Enable_Local_Migration": 1,
    "Local_Migration_Filename": "../inputs/local_migration.bin"
}

Enable_Maternal_Infection_Transmission

boolean

0

1

0

Controls whether or not infectious mothers infect infants at birth. Enable_Birth must be set to 1 (true).

Warning

Do not set both Enable_Maternal_Infection_Transmission and Enable_Strain_Tracking to true (1) - as this combination will cause an exception error.

 
{
    "Enable_Birth": 1,
    "Enable_Maternal_Infection_Transmission": 1
}

Enable_Maternal_Protection

boolean

0

1

0

Controls whether or not mothers pass immunity on to their infants. Setting to 1 (true) enables maternal protection as defined by Maternal_Protection_Type. Enable_Birth must be set to 1 (true).

 
{
    "Enable_Maternal_Protection": 1,
    "Maternal_Protection_Type": "LINEAR_FRACTIONAL"
}

Enable_Migration_Heterogeneity

boolean

0

1

1

Controls whether or not migration rate is heterogeneous among individuals within each group that has a migration rate setting. Set to true (1) to apply a migration rate distribution (see NodeAttributes demographics parameters); set to false (0) to use the same migration rate applied to all individuals in the group. For example, if you are using a migration file that sets different migration rates for each age group in a node, you could apply an Gaussian distribution around a mean value in each age group or you could assign the same value to each individual in each age group.

Migration_Model must be set to FIXED_RATE_MIGRATION.

 
{
    "Migration_Model": "FIXED_RATE_MIGRATION",
    "Enable_Migration_Heterogeneity": 1
}

Enable_Natural_Mortality

boolean

0

1

0

Controls whether or not individuals are removed from the simulation due to natural (non-disease) deaths. Enable_Vital_Dynamics must be set to 1 (true). Use Death_Rate_Dependence to set the natural death rate.

 
{
    "Enable_Natural_Mortality": 1,
    "Enable_Vital_Dynamics": 1
}

Enable_Property_Output

boolean

0

1

0

Controls whether or not to create property output reports, which detail groups as defined in IndividualProperties in the demographics file (see NodeProperties and IndividualProperties parameters). When there is more than one property type, the report will display the channel information for all combinations of the property type groups.

 
{
    "Enable_Property_Output": 1
}

Enable_Regional_Migration

boolean

0

1

0

Controls whether or not there is migration by road or rail network into and out of nodes in the simulation. Migration_Model must be set to FIXED_RATE_MIGRATION.

 
{
    "Migration_Model": "FIXED_RATE_MIGRATION",
    "Enable_Regional_Migration": 1,
    "Regional_Migration_Filename": "../inputs/regional_migration.bin"
}

Enable_Sea_Migration

boolean

0

1

0

Controls whether or not there is migration on ships into and out of coastal cities with seaports. Migration_Model must be set to FIXED_RATE_MIGRATION.

 
{
    "Migration_Model": "FIXED_RATE_MIGRATION",
    "Enable_Sea_Migration": 1,
    "Sea_Migration_Filename": "../inputs/sea_migration.bin"
}

Enable_Spatial_Output

boolean

0

1

0

Controls whether or not spatial output reports are created. If set to true (1), spatial output reports include all channels listed in the parameter Spatial_Output_Channels.

Note

Spatial output files require significant processing time and disk space.

 
{
    "Enable_Spatial_Output": 1,
    "Spatial_Output_Channels": [
        "Prevalence",
        "New_Infections"
    ]
}

Enable_Strain_Tracking

boolean

0

1

0

Enable an association of an infection with a specified strain, defined by unique integers for a clade and a genome.

For infections distributed through interventions, you specify clade and genome values using the Clade and Genome parameters with the Outbreak and OutbreakIndividual intervention classes in the campaign file.

When using an initial prevalence distribution, you specify clade and genome values using the InitialPrevalenceStrains parameter as part of IndividualAttributes in the demographics file.

When Enable_Strain_Tracking is set to false (0) or absent, all infections are associated with a single strain that has clade and genome identity (0, 0).

When Enable_Strain_Tracking is set to true (1) then both Number_of_Clades and Log2_Number_of_Genomes_per_Clade parameters must be specified.

Warning

Do not set both Enable_Strain_Tracking and Enable_Infectivity_Reservoir to true (1) or Enable_Strain_Tracking and Enable_Maternal_Infection_Transmission to true (1) - as these combinations will cause an exception error.

 
{
    "Enable_Strain_Tracking": 1,
    "Log2_Number_of_Genomes_per_Clade": 8,
    "Number_of_Clades": 2
}

Enable_Vital_Dynamics

boolean

0

1

1

Controls whether or not births and deaths occur in the simulation. Births and deaths must be individually enabled and set.

 
{
    "Enable_Vital_Dynamics": 1,
    "Enable_Birth": 1,
    "Death_Rate_Dependence": "NOT_INITIALIZED",
    "Base_Mortality": 0.002
}

TB_Enable_Exogenous

boolean

0

1

0

Controls whether or not exogenous reinfection of latent TB can occur.

 
{
    "TB_Enable_Exogenous": 1
}