BroadcastNodeEvent#
The BroadcastNodeEvent node intervention class broadcasts node events. This can be used with the campaign class, SurveillanceEventCoordinator, that can monitor and listen for events received from BroadcastNodeEvent and then perform an action based on the broadcasted event. You can also use this for the reporting of the broadcasted events by setting the configuraton parameters, Report_Node_Event_Recorder and Report_Surveillance_Event_Recorder, which listen to events to be recorded. You must use this coordinator class with listeners that are operating on the same core. You can also use NLHTIVNode. For more information, see Simulation core components.
Note
Parameters are case-sensitive. For Boolean parameters, set to 1 for true or 0 for false. Minimum, maximum, or default values of “NA” indicate that those values are not applicable for that parameter.
EMOD does not use true defaults; that is, if the dependency relationships indicate that a parameter is required, you must supply a value for it. However, many of the tools used to work with EMOD will use the default values provided below.
JSON format does not permit comments, but you can add “dummy” parameters to add contextual information to your files. Any keys that are not EMOD parameter names will be ignored by the model.
The table below describes all possible parameters with which this class can be configured. The JSON example that follows shows one potential configuration.
Parameter |
Data type |
Minimum |
Maximum |
Default |
Description |
Example |
---|---|---|---|---|---|---|
Broadcast_Event |
string |
NA |
NA |
“” |
The name of the node event to broadcast. This event must be set in the Custom_Node_Events configuration parameter. |
{
"class": "CampaignEvent",
"Start_Day": 5,
"Nodeset_Config": {
"class": "NodeSetNodeList",
"Node_List": [
1
]
},
"Event_Coordinator_Config": {
"class": "StandardInterventionDistributionEventCoordinator",
"Intervention_Config": {
"class": "BroadcastNodeEvent",
"Cost_To_Consumer": 10,
"Broadcast_Event": "Node_Event_1"
}
}
}
|
Cost_To_Consumer |
float |
0 |
999999 |
0 |
The unit cost of the intervention campaign that will be assigned to the specified nodes, as configured under Nodeset_Config. |
{
"class": "CampaignEvent",
"Start_Day": 5,
"Nodeset_Config": {
"class": "NodeSetNodeList",
"Node_List": [
1
]
},
"Event_Coordinator_Config": {
"class": "StandardInterventionDistributionEventCoordinator",
"Intervention_Config": {
"class": "BroadcastNodeEvent",
"Cost_To_Consumer": 10,
"Broadcast_Event": "Node_Event_1"
}
}
}
|
Disqualifying_Properties |
array of strings |
NA |
NA |
[] |
A list of NodeProperty key:value pairs that cause an intervention to be aborted (persistent interventions will stop being distributed to individuals with these values). See NodeProperties and IndividualProperties parameters for more information. Generally used to control the flow of health care access. For example, to prevent the same individual from accessing health care via two different routes at the same time. |
{
"Disqualifying_Properties": [
"InterventionStatus:LostForever"
]
}
|
Dont_Allow_Duplicates |
boolean |
0 |
1 |
0 |
If an individual’s container has an intervention, set to true (1) to prevent them from receiving another copy of the intervention. Supported by all intervention classes. |
{
"Dont_Allow_Duplicates": 0
}
|
Intervention_Name |
string |
NA |
NA |
BroadcastNodeEvent |
The optional name used to refer to this intervention as a means to differentiate it from others that use the same class. |
{
"Intervention_Config": {
"class": "BroadcastNodeEvent",
"Intervention_Name": "Mosquito coil repellent"
}
}
|
New_Property_Value |
string |
NA |
NA |
“” |
An optional NodeProperty key:value pair that will be assigned when the intervention is applied. See NodeProperties and IndividualProperties parameters for more information. |
{
"New_Property_Value": "HasHealthCare:YES"
}
|
{
"Events": [
{
"class": "CampaignEvent",
"Start_Day": 1,
"Nodeset_Config": {
"class": "NodeSetAll"
},
"Event_Coordinator_Config": {
"class": "StandardInterventionDistributionEventCoordinator",
"Target_Demographic": "Everyone",
"Demographic_Coverage": 0.5,
"Intervention_Config": {
"class": "OutbreakIndividual",
"Incubation_Period_Override": 0,
"Antigen": 0,
"Genome": 0
}
}
},
{
"class": "CampaignEvent",
"Start_Day": 5,
"Nodeset_Config": {
"class": "NodeSetNodeList",
"Node_List": [ 1 ]
},
"Event_Coordinator_Config": {
"class": "StandardInterventionDistributionEventCoordinator",
"Intervention_Config": {
"class": "BroadcastNodeEvent",
"Cost_To_Consumer" : 10,
"Broadcast_Event" : "Node_Event_1"
}
}
},
{
"class": "CampaignEvent",
"Start_Day": 15,
"Nodeset_Config": {
"class": "NodeSetNodeList",
"Node_List": [ 2,3 ]
},
"Event_Coordinator_Config": {
"class": "StandardInterventionDistributionEventCoordinator",
"Intervention_Config": {
"class": "BroadcastNodeEvent",
"Cost_To_Consumer" : 20,
"Broadcast_Event" : "Node_Event_2"
}
}
},
{
"class": "CampaignEvent",
"Start_Day": 25,
"Nodeset_Config": { "class": "NodeSetAll" },
"Event_Coordinator_Config": {
"class": "StandardInterventionDistributionEventCoordinator",
"Intervention_Config": {
"class": "BroadcastNodeEvent",
"Cost_To_Consumer" : 25,
"Broadcast_Event" : "Node_Event_3"
}
}
}
],
"Use_Defaults": 1
}